 |
| Bending the trailing edge tubes. |
 |
| Test fitting the Elevator Control Horn Assembly |
 |
| Fitting the ribs for gluing. |
 |
| Setting up two leveled tables for rib fitting. |
 |
| Wire used to keep inner reinforcing tube from shifting out of place. |
 |
| Kitchen microplane used on foam to achieve desired shape. |
 |
| Leveling out temporary ceiling hangers. |
 |
| Epoxy layup of fiberglass. Painters tape helps keep ends in place during curing. |
 |
| The day was a bit cooler than optimal for epoxy cure. Sunshine helped out. |
No comments:
Post a Comment
Questions, comments and advice are welcome!